CB Tool Group - CURRENT FEATURES

Rockler Pocket Hole Clamp

Mon, 26 Apr 2010 10:20:00 GMT

Rockler Pocket Hole Clamp
Buy Now: ~~$19.99~~ $17.99

NEW Pocket Hole Clamp—from Rockler

Now youcan clamp andsurface align your pocket hole joints easily. Rockler’snew Pocket Hole Clamp works with 3/8'' pocket holes on 3/4'' thickface frames and casework. Its ratcheting handle allows the clamp tofunction while your work is laying flat on the workbench. And theclearance in clamp body allows for clamping and fastening of doublejoints in one step.

This clampfeatures an adjustable pin so you can work with pocket holes ofvarying depth. The lightweight, die-cast aluminum clamp fits stockup to 3” wide and reduces the need for large bar clamps. Patentpending.

Visit CURRENT FEATURES to see additional products in this category.

Jet Air Filtration System-- AFS 1000, 1,000 CFM, 3-Speed, with Remote Control

Tue, 30 Mar 2010 14:32:00 GMT

Jet Air Filtration System-- AFS 1000, 1,000 CFM, 3-Speed, with Remote Control
Buy Now: ~~$319.99~~ $249.99

This powerful unit is perfect for the smaller home shop. Simplyhang it from the ceiling turn it on and it will clear the room ofthose fine dust particles. This unit was the first in the industrywith remote control, timer and three speeds which have quicklybecome the industry standard.

Featuresinclude:

DisposableElectrostatic Outer Filter attracts more dust particles thanstandard filters
Inner PocketFilter is removable for easy cleaning
Easy GripHandles allow easy portability of unit
Four EyeBolts (with AFS-1000B only) let you hang unit from shopceiling
RemoteControl has built-in timer with 2, 4 and 8-hour settings;automatically shuts system off at the end of the time setting
Fully-Enclosed Ball Bearing Motor with Overload Protection forlong, dependable service
Rubber Feetprevent marring of surface when placed on workbench.

Warranty: 5Year.

Visit CURRENT FEATURES to see additional products in this category.

Jet DC-1100 Dust Collector 1-1/2HP 1100 CFM with 1 Micron Canister Filter

Tue, 30 Mar 2010 14:32:00 GMT

Jet DC-1100 Dust Collector 1-1/2HP 1100 CFM with 1 Micron Canister Filter
Buy Now: ~~$599.99~~ $479.99

JET Model DC 1100 dust collectors are built with industrial-qualityconstruction, effectively handling collection of wood chips andsawdust. Each DC 1100 dust collector comes equipped with aquick-install collection bag, single-stage design for economicaland quiet operation, 4 casters for maneuverability and totalportability, and permanently lubricated, fully enclosed, fan-cooledmotors for continuous duty. An optional remote control is radiofrequency so there is no need for line of sight to turn the machineon and off.

Featuresinclude:

Industrial-quality construction effectively handles collection ofwood chips and sawdust
Quick-installcollection bag makes emptying and re-attaching a snap
Single-stagedesign for economical and quiet operation
Industrialcontrols designed for years of trouble-free use
Quick-connectcollection bags with elastic band for fast, easy installation andremoval
High airvelocity (CFM) design stands up to any competitivespecifications
Permanentlylubricated, totally enclosed, fan-cooled motors are rated forcontinuous-duty.

Includesfour casters for maneuverability and total portability.

Warranty: 5Year.

Visit CURRENT FEATURES to see additional products in this category.

Jet DC-1100, 1-1/2HP, 1Ph Dust Collector

Tue, 30 Mar 2010 14:32:00 GMT

Jet DC-1100, 1-1/2HP, 1Ph Dust Collector
Buy Now: ~~$399.99~~ $299.99

The one-of-a-kind JET DC-1100 boasts a 1.5 horsepower motor yetkeeps your shop clean quietly. With industrial-qualityconstruction, the DC-1100 effectively handles any collection ofwood and sawdust debris with ease. The convenient 1,100 CFM machinemoves around effortlessly on 4 swivel casters.

Featuresinclude:

Industrial-quality construction effectively handles collection ofwood chips and sawdust
Single-stagedesign for economical and quiet operation
Industrialcontrols designed for years of trouble-free use
Quick-connectcollection bags with elastic band for fast, easy installation andremoval
High airvelocity (CFM) design stands up to any competitivespecifications
Permanentlylubricated, totally enclosed, fan-cooled motors are rated forcontinuous-duty.

Includesfour casters for maneuverability and total portability Warranty: 5Year.

Visit CURRENT FEATURES to see additional products in this category.

Powermatic Air Filtration System-- PM1200

Tue, 30 Mar 2010 14:32:00 GMT

Powermatic Air Filtration System-- PM1200
Buy Now: ~~$379.99~~ $319.99

Your shop may look clean, but how clean is the air?

The PM1200 AirFiltration System traps up to 99% of all 5-micron particles and 85%of all 1-micron particles for a healthier work environment.Three blower speeds modify air flow. The unit can be operatedeither at the cabinet or with the remote transmitter which usesradio-frequency, eliminating the need for line-of-sight operation.The timer has nine settings, allowing continuous operation for upto 9 hours while you’re away, and will shut off at the end of thatperiod. The filter guards can be removed and installed withouttools, for instant filter access.

Featuresinclude:

Two-filtersystem traps particles as small as 1 micron
Remotecontrol operates on radio frequency for wider range ofeffectiveness
Timer hasnine settings, for up to nine hours of continuous operation
Inner filterhas fine mesh pockets for high efficiency, can be blown clean
Electrostaticouter filter is disposable
Diffusionfilter disperses exhausted air
Four eyebolts allow suspension from shop ceiling
Indicatorlights up after 200 hours to remind user to replace filters
Three blowerspeeds to modify air flow
Filter guardsinstall and remove easily without tools for quick access tofilters
Two carryhandles for portability
Fullyenclosed motor has overload protection for long service life.

Warranty: 5Year.

Visit CURRENT FEATURES to see additional products in this category.

Powermatic PM1300 Dust Collector, 1.75HP 1PH, with Bag Filter Kit

Tue, 30 Mar 2010 14:32:00 GMT

Powermatic PM1300 Dust Collector, 1.75HP 1PH, with Bag Filter Kit
Buy Now: ~~$499.99~~ $424.99

The PM1300 Dust Collector has dual 4” dust ports (or one 6”). Thecloth filter bag is made of a 30 micron material which aids in thefiltration of all but the finest dust particles, and the largecapacity collection bag reduces the number of bag changes. Adigital timer can be set for up to 99 minutes, and an infraredsensor allows remote control operation. The all-metal duct improvesrigidity and air flow. Four swivel casters and conveniently locatedhandles allow for easy mobility.

Featuresinclude:

Remote-controlled digital timer can be programmed for up to 99minutes
All-metalduct construction for rigidity and improved air flow
Dual 4" dustports for simultaneous collection from two machines
1-3/4HP motoroffers plenty of power for effective air movement
Clothcollection bag with view window uses snap ring for rapidinstallation/removal
10 cubic feetcapacity collection bag reduces number of bag changes.
Tall filterbag requires less cleaning due to the larger surface area
Four swivelcasters for shop maneuverabilty
StandardEquipment:
- 1-3/4HP TEFCmotor
- Remotecontrol
- Cloth filterbag with strap
- Clothcollection bag
- Swivelcasters
- Dual 4 inchdust port.

Warranty: 5Year.

Visit CURRENT FEATURES to see additional products in this category.

Powermatic PM1300 Dust Collector, 1.75HP 1PH, with Canister Kit

Tue, 30 Mar 2010 14:32:00 GMT

Powermatic PM1300 Dust Collector, 1.75HP 1PH, with Canister Kit
Buy Now: ~~$699.99~~ $599.99

The PM1300 Dust Collector has dual 4” dust ports (or one 6”). Thecanister filter offers superior filtering surface area overstandard bags, and captures 98% of 2-micron particles. A digitaltimer can be set for up to 99 minutes, and an infrared sensorallows remote control operation. The all-metal duct improves airflow and rigidity. The clear collector bags are large capacity,which means less down-time changing them. Four swivel casters andconveniently located handles allow for easy mobility.

Featuresinclude:

Remote-controlled digital timer can be programmed for up to 99minutes
Canisterfilter offers over six times filtering surface area of standardbags
All-metalduct construction for rigidity and improved air flow
1-3/4HP motoroffers plenty of power for effective air movement
Dual 4" dustports for simultaneous collection from two machines
Collectionbag uses a snap ring, so it can be installed/removed rapidly
10 cubic feetcapacity collection bag reduces number of bag changes.
Four swivelcasters for shop maneuverability.
StandardEquipment:
- 1-3/4HP TEFCmotor
- Remotecontrol
- Canisterfilter
- Set of 5clear collection bags
- Swivelcasters
- Dual 4" dustport.

Warranty: 5Year.

Visit CURRENT FEATURES to see additional products in this category.

Rockler Router Mat - 24" x 36" Non-Slip Pad

Mon, 8 Feb 2010 13:51:00 GMT

Rockler Router Mat - 24" x 36" Non-Slip Pad
Buy Now: ~~$9.99~~ $8.99

The Rockler Router Mat is a 24" x 36" non-slip pad that holds projects firmly in place. Its ideal for use with routers, electric sanders and more! Rolls up for easy storage. Black only.

Visit CURRENT FEATURES to see additional products in this category.

Rockler Bench Cookies - (4) per pack

Mon, 8 Feb 2010 13:49:00 GMT

Rockler Bench Cookies - (4) per pack
Buy Now: ~~$11.99~~ $10.99

The non-slip way to give your project a lift--Bench Cookies comefour per pack. Each cookie is 3'' dia. x 1'' thick.

Visit CURRENT FEATURES to see additional products in this category.

Kreg Master Pocket Hole System

Wed, 20 Jan 2010 09:24:00 GMT

Kreg Master Pocket Hole System
Buy Now: ~~$149.99~~ $139.00

The Kreg Jig® Master System is the ultimate Pocket-Hole Jig on themarket, and a great choice for any woodworking enthusiast. Betweenits front-side clamping capabilities, dust-collection attachment,material support stop, removable 3-hole drill guide, and seeminglyendless adjustability, this jig truly has it all! If you’re seriousabout pocket-screw joinery--this is the kit you need.

Kit Includes.. .
. . . everything you need to get started with Pocket-Screw Joinery:the Kreg Jig® Master System, Face Clamp™, Portable Base, DrillGuide Spacer, Material Support Stop, Dust Collection Attachment,3/8” Stepped Drill Bit, 6” Square Driver, 3” Square Driver, StarterScrew Set, Starter Plug Set, Detailed Instruction Manual , allinside a durable carrying case.

Visit CURRENT FEATURES to see additional products in this category.